倍加福KCD0-SD-EX1.1245安全栅

倍加福KCD0-SD-EX1.1245安全栅特征
•单通道
•24v直流电源(回路供电)
•12v直流时，电流限制45毫安
•外壳宽度12.5毫米
•根据IEC 61508，安全等级可达SIL3

应用
这种隔离屏障用于内在安全应用。它为螺线管、led和可听到的报警提供电源位于危险区域。它是循环供电的，所以输出的可用能量是从输入信号接收。输出信号有a电阻的特点。因此输出电压和电流取决于负载和输入电压。在满载时，12v 45毫安可用于危险区域应用程序。

General specifications
Signal type Digital Output
Supply
Connection loop powered
Power loss < 1 W
Input
Connection terminals 5, 6
Rated voltage Un 19 ... 30 V DC
Current ≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load
≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output
≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output
Inrush current ≤ 200 mA after 100 μs
Output
Connection terminals 1+, 2-
Internal resistor Ri ≤ 238 Ω
Current Ie ≤ 45 mA
Voltage Ue ≥ 12 V
Open loop voltage Us ≥ 22.7 V
Output rated operating current 45 mA
Output ** These values are valid for the rated operating voltage 19 ... 30 V DC.
Energized/De-energized delay single operation: typ. 1.7 ms/50 μs; periodical: typ. 5 μs/50 μs