倍加福KCD2-STC-1.2O信号分配器

倍加福KCD2-STC-1.2O信号分配器
倍加福KCD2-STC-1.2O信号分配器
倍加福KCD2-STC-1.2O信号分配器

KCD2-STC-1.2O信号分配器，一进二出，输入输出信号4-20mA，24V工作电压，满足有源/无源输出。
启栅（上海）自动化设备有限公司供应安全栅，隔离器，信号分配器，浪涌保护器等，提供技术支持，欢迎来电咨询。
KCD2-STC-1.2O信号分配器技术参数
一般特性
Signal type	Analog input
供电
连接器	Power Rail or terminals 9+, 10-
额定电压	18 ... 30 V DC
纹波	在电源容限内
功耗	approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs
功耗	2 W
KCD2-STC-1.2O信号分配器输入
连接器	terminals 1+, 2- (sink); 3+, 4- (source)
输入信号	0/4 ... 20 mA
电压降	≤ 6.1 V at 20 mA (terminals 3, 4)
输入电阻	terminals 3+, 4-: max. 310 Ω 
terminals 1+, 2-: max. 500 Ω (250 Ω load)
Available voltage	≥ 15 V at 20 mA terminals 1+, 2-
KCD2-STC-1.2O信号分配器输出
连接器	source: terminals 5-, 6+; 7-, 8+ 
sink: terminals 5+, 6-, 7+, 8-
负载	channel 1: 0 ... 500 Ω (20 mA)/< 2.5 MΩ (5 V)
channel 2: 0 ... 500 Ω (20 mA)/< 2.5 MΩ (5 V)
输出信号	0/4 ... 20 mA or 0/1 ... 5 V
纹波	max. 50 μA rms
Transfer characteristics
偏差	Iout < 20 μA; Vout < 7.5 mV incl. calibration, linearity, hysteresis and fluctuation of supply voltage, 
at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V 
频率范围	field side into the control side: bandwidth with 0.5 Vpp ** 0 ... 7.5 kHz (-3 dB) 
control side into the field side: bandwidth with 0.5 Vpp ** 0.3 ... 7.5 kHz (-3 dB)
Settling time	200 μs
Rise time/fall time	20 μs
指令符合
电磁兼容性
Directive 2004/108/EC	EN 61326-1:2013 (industrial locations)
Conformity
电磁兼容性	NE 21:2006
防护等级	IEC 60529:2001
周围环境
环境温度	-20 ... 60 °C (-4 ... 140 °F)
机械特性
防护等级	IP20
重量	approx. 100 g
外形尺寸	12.5 x 114 x 122 mm (0.5 x 4.5 x 4.8 in) , housing type A2
安装	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with Ex-areas
EC-类型 鉴定证书	BASEEFA 13 ATEX 0077 X
保护型号、类别、组别	KCD2-STC-Ex1.2O 保护型号、类别、组别 II (1)G [Ex ia Ga] IIC 
KCD2-STC-Ex1.2O 保护型号、类别、组别 II (1)D [Ex ia Da] IIIC 
KCD2-STC-Ex1.2O 保护型号、类别、组别 I (M1) [Ex ia Ma] I
符合标准	BASEEFA 13 ATEX 0078 X , observe statement of conformity
Group, category, type of protection, temperature class	KCD2-STC-Ex1.2O 保护型号、类别、组别 II 3G Ex nA II T4 Gc [device in zone 2]
指令符合
94/9/EC 指令	EN 60079-0:2012, EN 60079-11:2012, EN 60079-15:2010
International approvals
UL认证
控制图	116-0380 (cULus)
IECEx approval	IECEx BAS 13.0043X
Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
一般说明
注释	Both output loads must be connected to ensure complete and correct operation within the technical specification.

以下型号常备库存，欢迎来电咨询！
KCD2-STC-1
KCD2-SCD-1
KCD2-SR-1.LB
KFD2-STC4-1
KFD2-STC4-1.2O
KFD2-STC4-2
KFD2-CRG2-1.D
KFD2-GUT-1.D
KFD2-UFC-1.D
KFD2-USC-1.D
KFD2-SR2-2.2S
KFD2-UT2-1
KFD2-UT2-2
UPR-03 倍加福2米长供电导轨现货  DIN导轨安装
KFD2-EB2.R4A.B
KCD0-SD-EX1.1245
KFD0-CC-1
KFD0-CS-EX2.51P
KFD0-CS-EX2.54
KFD0-RO-EX2
KCD2-SR-EX2
KCD2-SR-EX1.LB
KCD2-STC-EX1
KCD2-SCD-EX1